Epoxy Floor Flakes Minnesota
Decorative Flake Systems Built for Real Life. Minnesota's go-to crew for epoxy flake garage floors — dustless prep, premium materials, done in 2 days.
Stop the Damage Before It Spreads
A worn, stained, or cracked garage floor does not fix itself. Left bare, concrete absorbs oil, road salt, and moisture until the surface starts to pit and spall, and by the time most homeowners call a flooring contractor, the damage has been building for years. Epoxy floor flakes in Minnesota, installed over a properly prepared surface with professional-grade materials, stop that process and give the floor a finish that performs and looks the part for years to come.
Epoxy Flake Flooring Services
Xtreme Coatings travels throughout Minnesota, serving customers from St. Cloud and Brainerd to the Twin Cities, Duluth, and Rochester, and covering a 200-mile radius from our base in Milaca. We install full flake, partial flake, and polyaspartic garage floor systems using Torginol vinyl flakes and Surecrete polyaspartic topcoats on every project. The result is a decorative, non-slip, chemical-resistant surface that holds up in a Minnesota garage, shop, or commercial space without peeling, yellowing, or fading.
Every install starts with dustless diamond grinding to profile the concrete and open the pores for a mechanical bond. No shortcuts on prep means no callbacks for delamination.
Full Flake Epoxy System
A full flake system broadcasts Torginol vinyl flakes wall to wall across the epoxy base coat until the entire floor surface is covered. The flakes are then locked in place under a clear polyaspartic topcoat, producing a textured, non-slip surface that hides minor surface imperfections in the concrete and holds up well under vehicle loads, foot traffic, and seasonal moisture.
Full flake is the most popular system for residential garages across Minnesota because it combines serious durability with a finish that looks custom rather than industrial. The texture from the flake broadcast also adds grip, which matters in a garage where wet vehicles pull in from rain or snow. Color blends run from neutral grays and tans to bold two-tone combinations, so the floor can match the space rather than just covering it.
The polyaspartic topcoat used on all full flake installs cures within hours, resists UV yellowing, handles hot tire contact without softening, and does not require periodic recoating the way painted concrete does. One installation done right lasts significantly longer than any paint or sealer product available at a hardware store.
Partial Flake Epoxy System
A partial flake system uses a lower broadcast density, leaving areas of the solid base coat visible between the flakes. The effect is a speckled, textured finish that reads as more subtle than a full flake floor while carrying the same structural performance underneath.
Partial flake works well for basements, laundry rooms, light commercial spaces, and homeowners who want a decorative finish without the full coverage look. The same dustless grinding prep, Torginol flake products, and polyaspartic topcoat process apply, so the durability is identical to a full flake system. The visual result is the only difference.
Polyaspartic Garage Floor Systems
Polyaspartic coatings cure faster than standard epoxy, resist UV exposure without yellowing, and handle the specific demands of a garage environment better than most floor coating products on the market. For Minnesota garages that deal with road salt, freeze-thaw cycles, and hot tires pulling in from summer asphalt, a polyaspartic system is the right specification.
Xtreme Coatings uses Surecrete polyaspartic formulas on all garage floor installs. These products cure within hours rather than days, which is what makes a 2-day install realistic on most residential garage projects. The topcoat is applied over the flake layer and seals the system against the chemical and physical threats a garage floor faces on a daily basis.
Case Study — Brainerd, MN: A customer called after a big-box store epoxy kit failed within one Minnesota winter. The topcoat had bubbled, the flakes were lifting, and the floor looked worse than before. We ground the surface back to bare concrete, applied a proper primer, installed a full Torginol flake layer, and sealed it with a polyaspartic topcoat. Two winters on, the floor is holding without a single sign of failure.
See the Transformation
Drag the slider to see how dustless grinding prep and a full Torginol flake system turn a worn garage or shop floor into a durable, decorative surface.
Before
After
Auto Shop — Full Flake Floor
Before
After
Shop & Office — Full Flake Floor
Lock In Your 2-Day Flake Floor Install
Protect your concrete before the damage starts. Get connected with Minnesota's preferred flake flooring specialists for a decorative, non-slip finish built to handle real Minnesota winters.
Choose Your Flake Blend
Every flake system can be customized with a decorative blend to match your space — from neutral greys to warm rustic tones and bold two-tone combinations. Start with our most popular blends below, or browse the full color library.
Bestsellers
Domino
Gravel
Cabin Fever
Tidal Wave
Quicksilver
Mushroom
Standard Blends
Nightfall
Domino
Gravel
Shoreline
Outback
Cabin Fever
Wombat
Keystone
Creekbed
Torginol Blends
Tidal Wave
Quicksilver
Dovetail
Nightfall (Torginol)
Crossbow
Madras
Mushroom
Waxwing
What You Get When You Call Xtreme Coatings
A Statewide Crew That Shows Up and Stays Accountable
Xtreme Coatings is family-owned and based in Milaca, and we travel up to 200 miles across Minnesota to serve customers who want a properly installed floor coating rather than whoever happens to be closest. From the Twin Cities to Duluth to Rochester, we bring the same prep standards, the same product lines, and the same accountability to every project.
2-Day Install, No Return Visits
Most flake floor installs are complete within two days. That is not a stretch claim. Polyaspartic systems cure fast by design, and our dustless grinding prep eliminates the adhesion failures that force other contractors back for repairs. When we leave, the floor is done.
Dustless Grinding Every Time
Surface preparation determines how long a coating lasts. Our dustless diamond grinding equipment removes failed coatings, laitance, and surface contamination before every install, opening the concrete to the mechanical bond that keeps the coating in place through years of real use. It also keeps your garage or shop clean during the process.
Financing That Removes the Barrier
Customers who need a new floor but want to manage the cost can move forward now rather than waiting. The 12-month interest-free financing option means the project does not have to sit on a to-do list while the concrete continues to deteriorate.
Professional Materials, Not Hardware Store Products
Every system uses Torginol vinyl flakes, Lab Surface epoxy, and Surecrete polyaspartic and polyurea topcoats. These products are not sold at retail. They are specified for professional installation in demanding environments and perform accordingly.
Workmanship Guarantee
Every floor we install is backed by our workmanship warranty — if an issue is found to be covered under the warranty terms, it's corrected at no cost to you. View warranty details.
Flake Floors We Have Finished Across Minnesota.
A sample of full flake and partial flake garage installs from across the state.
Trusted by Minnesota Garage Floor Owners
Areas We Serve
We proudly serve homeowners and businesses across the state, traveling up to a 200-mile radius to deliver premium flake flooring systems.
Statewide Service Area
St. Cloud, Brainerd, Minneapolis, St. Paul, Maple Grove, Elk River, Blaine, Monticello, Alexandria, Duluth, Rochester, Grand Rapids, and communities throughout central and greater Minnesota.
Get Your Free Flake Floor Quote
Your concrete floor is either holding up or breaking down right now. A properly installed epoxy flake system stops the damage and gives you a surface that works for the long term. Xtreme Coatings serves customers across Minnesota within a 200-mile radius, and most projects are complete within two days of starting.
12 months interest-free financing is available on approved projects. Repair your concrete, do not replace it.
Xtreme Coatings — 7219 140th St, Milaca, MN 56353, serving a 200-mile radius across Minnesota. Contact us today for a free quote.
Financing disclosure: 12 months interest-free promotional financing is offered to qualified customers on approved projects. Financing is deferred interest, not waived interest. Interest accrues during the 12 month window and is due in full if the balance is not paid by the end of the promotional period. Subject to credit approval. Lender terms available on request.
Workmanship warranty: Every installation is backed by our workmanship warranty — if a coating failure is the result of our installation rather than surface movement, moisture intrusion, or outside damage, we return and correct it at no cost during the warranty period. Flake, metallic, solid color, and polyaspartic/polyurea systems also carry manufacturer-backed product warranties from Torginol, Lab Surface, and Surecrete. Ask your estimator for the specific warranty length and terms that apply to your project.